Lime-A-Way® Toilet Bowl Cleaner

Lime-A-Way® for hard water stains in toilet
 

LIME-A-WAY® Toilet Bowl Cleaner is the hard water solution for your toilet, taking on tough stains even below the waterline.

  • Specially designed for the toilet bowl
  • Keeps your toilet free of stubborn lime, calcium and rust stains
  • Fights hard water stains in toilet, even below the waterline
  • Leaves your toilet bowl clean and smelling fresh

For hard water stains on large surfaces, check out LIME-A-WAY® Toggle, which can easily eliminate limescale, calcium, and rust stains. For smaller surfaces LIME-A-WAY® Trigger provides a convenient way to spray away hard water stains.

Directions

To clean hard water stains in toilet bowl:

  1. Flush toilet and remove excess dirt and grime before cleaning.
  2. Wet all surface of bowl interior, including sides of bowl and under the rim with at least 4 oz of LIME-A-WAY® Toilet Bowl Cleaner (squeeze bottle approximately for 15 seconds). Replace cap securely.
  3. Let soak for at least 10 minutes. Do not close toilet bowl lid.
  4. Brush entire bowl thoroughly with a bowl brush and then flush.
  5. Rinse brush in fresh water after use.

To remove tough Lime, Calcium & Rust Stains:

  1. Apply a generous amount of LIME-A-WAY® Toilet Bowl Cleaner directly onto tough stains. For severe, tough stains, if possible remove water from the bowl before applying liquid.
  2. Let soak for 15 minutes, do not close the bowl lid.
  3. Brush entire bowl thoroughly with a bowl brush and then flush.
  4. Rinse brush in fresh water after use.
  5. Repeat if necessary.

Available in 16 oz., 24 oz.